Beurer Ipl 10000 Plus Hair Remover 250000 L

Beurer Ipl 10000 Plus Hair Remover 250000 L

QAR 3,299.00

Out Of Stock

Beurer

Title:  

Product Description:

The beurer SalonPro System is a light-based device for lasting hair removal for private use. The hair removal process based on laser and light is a well known and proven method. In 15 years of clinical applications around the world, it has proven to be a safe and effective method for achieving long-lasting hair reduction.


Features:

  • Long-lasting hair removal with professional technology from the beauty salon
  • Skin tolerance dermatologically confirmed
  • Fastest application on the market
  • XXL large 7 cm light surface
  • Lifetime flashes up to 250,000 light pulses
  • Includes precision attachment
  • With automatic sensor for individual skin tone detection
  • State-of-the-art light technology used by dermatologists for professional hair removal
  • IPL (intense pulsed light) deactivates the hair follicle deep under the skin to prevent hair regrowth
  • Up to 50% hair reduction after just 3 to 4 treatments
  • Unrivalled safety with the 2-in-1 skin-type and skin-contact sensor
  • Integrated UV filter
  • 6 energy levels
  • For the faces, arms, legs, armpits, bikini line and the back, chest and stomach
  • Around just 26 minutes to treat the entire body
  • Flash-glide function for convenient application
  • Not suitable for dark skin tones and particularly light/white hair

 

Cleaning & Storage Instructions:

  • Once the hair removal session using the beurer SalonPro System is finished, switch off the device by flipping the power switch off
  • Unplug the main cable from the main socket
  • After each hair removal session, it is recommended that you clean your beurer SalonPro System paying particular attention to the light area
  • After cleaning, it is recommended that you store your beurer SalonPro System in its original box and keep away from water



Directions To Use:

  • Before the treatment, ensure that the skin is shaved, clean and dry (free from any residue such as powder, cream, make-up, antiperspirant or deodorant). Note: In the case of facial treatment, the skin sensitivity test should be performed on an area without hair, such as below the ear or on the side of the neck
  • Remove the base unit, applicator and other components of the beurer SalonPro System from the box
  • Check that the cartridge is correctly plugged into the applicator
  • Insert the main cable into the socket of the beurer SalonPro System BASE UNIT
  • Insert the other end of the main cable into a plug socket. Your beurer SalonPro System is now ready for use
  • Flip the power switch on the back of the base unit. The indicator lamp and the energy indicator lamp are illuminated and the noise of a fan can be heard
  • The device is automatically set to the lowest energy level. The device is then ready to emit the first pulse
  • The energy selection buttons "-" and "+" for the energy level can be used to decrease or increase the energy level to set the device to the level determined in the skin sensitivity test and/or to adjust the setting to your requirements. The energy indicator lamps illuminate green in accordance with the selected energy level
  • Place the light area of the cartridge on the desired treatment area and make sure it is in full contact with the skin
  • Press the trigger button. You will see a bright flash, hear a cracking noise and may feel a slight burning sensation and/or warmth. The beurer SalonPro System features a "flash-glide" function. When you press and hold the trigger button, a bright flash is automatically triggered every three seconds, meaning that you do not have to press the trigger button every time. Note: If you press the trigger button and your skin is too dark or too tanned, the indicator lamp on the applicator illuminates red. In this case, the applicator does not trigger a pulse on this area of skin. If the applicator does not have sufficient contact with the skin and you press the trigger button, the indicator lamp on the applicator illuminates orange. In this case, the applicator does not trigger a pulse on this area of skin either
  • Remove the applicator from the skin and place it on the next part of the treatment area. When repositioning the applicator, make sure not to leave any gaps or overlap the treated skin. The device recharges itself immediately and is ready for the next pulse within three seconds (the indicator lamp on the applicator continuously illuminates green once again). Repeat the process until the entire area of skin has been treated

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You May Also Like


Delivery in 1 to 2 hours

Free delivery for purchases above QAR 150

Cash on delivery

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)